PM 5005

https://www.marantz.com/it-it/shop/amplifier/pm5005

Specific Current Feedback type circuitry
Toroidal type primary power transformer
“High grade” audio components Linear power supply “Source direct” function
Low consumption stand-by and with automatic selection when not in use in the "on" position
Output power 8 / 4 Ohm RM: 40/55 Watts
8 /4 Ohm DIN: 45/60 Watts 8 /4 Ohm IHF: 55/80 Watts Frequency response 10 Hz – 50 kHz
Total harmonic distortion <0.05% Damping factor 100
Input sensitivity: MM 2.2 mV / 47 kOhm Signal-to-noise ratio MM / MC 83 dB
Input Sensitivity: High Level 200 mV/20 kOhm Signal to Noise Ratio: High Level 102 dB
Available in Black and Silver Metal front panel
Current consumption 110 Watts Standby 0.3 Watts
Automatic shutdown RC002PMCD model remote control
Dimensions (WxHxD) in mm 440 x 105 x 370 Weight 6.7 Kg

PM 6006

https://www.marantz.com/it-it/shop/amplifier/pm6006

 Output power: 45W / 60W Frequency response: 10Hz - 70kHz
Total harmonic distortion: 0.08 % Damping factor: 100
Input sensitivity: MM 2.2 mV / 47 kOhm
Signal to Noise Ratio: MM/MC 83 dB / -
Input sensitivity: High level 200 mV / 20 kOhm
Signal to noise ratio: High level 102 dB (2V input)
Channels: 2 Current Feedback Phono EQ Technology: Standard
Balance / Bass / Treble / Loudness Audio inputs: 5 Digital inputs: 2 optical

1 Coaxial Phono Input: MM Audio Outputs: 1 Gold Plated Cinch Connectors
Speakers A / B Number of terminals: 4 D-Bus Headphone output iPod input (direct / docking station)
Available finishes: Black / Silver-Gold Metal front panel
Current consumption in Watts: 155 Standby consumption in Watts: 0.3
Automatic switch-off. Detachable mains power cable
Remote control: RC003PMCD Remote system function
Maximum Dimensions (W x D x H) in mm: 440 x 370 x 105 Weight in Kg: 7.6

PM8006

https://www.marantz.com/it-it/shop/amplifier/pm8006

RMS power ) 70 W / 100 W Frequency response 5 Hz-100 kHz

Total harmonic distortion 0,02% Damping factor 100

Input sensitivity: MM 2 mV / 47 kOhm Input sensitivity: MC

Signal-to-noise ratio: MM / MC 87 dB / -Input sensitivity: high level 200 mV / 20 kOhm Input sensitivity: high level balanced Signal-to-noise ratio: high level 106dB (2V input) Input sensitivity: Amp power Direct IN 1,6 V / 15 kOhm Signal-to-noise ratio: Amp power Direct IN 125 dB Available colors: Gold / Silver / Black / Silver-Gold - / - / o / o Front panel Metallic o Power consumption in W 220 Standby consumption in W 0,2 Auto power off o Removable power cord o Remote control RC001PMN System remote function o Maximum dimensions (W x D x H) in mm 440 x 379 x 128 Weight in kg 12,0

PM KI RUBY

https://www.marantz.com/it-it/shop/amplifier/pmkiruby

RMS Power output (Simultaneous drive of both channels) :
100 W x 2 (8 Ω/ohms load, 1 kHz, THD 0.05 %) 200 W x 2 (4 Ω/ohms load, 1 kHz, THD 0.1 %)
Total harmonic distortion
(1 kHz, simultaneous drive of both channels, 100 W, 8 Ω/ohms load) : 0.005 %
Frequency response (CD, 1 W, 8 Ω/ohms load): 5 Hz – 50 kHz ±3 dB
Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz): 500 

Input sensitivity/Input impedance PHONO (MC) : 250 μV / 100 Ω/ohms

PHONO (MM) : 2.3 mV/39 kΩ/kohms
 CD/LINE/RECORDER : 220 mV/13 kΩ/kohms POWER AMP : 1.1 V/13 kΩ/kohms
Maximum allowable PHONO input level (1 kHz) MC : 8 mV MM : 80 mV
RIAA deviation (20 Hz – 20 kHz): ±0.5 dB S/N (IHF-A, 8 Ω/ohms load)
PHONO (MC) : 75 dB (0.5 mV Input) PHONO (MM) : 88 dB (5 mV Input)
 CD/LINE/RECORDER : 107 dB (Rated output) 

Tone Control BASS (50 Hz) : ±6 dB TREBLE (20 kHz) : ±6 dB Power supply : AC 230 V, 50/60 Hz Power consumption : 130 W Power consumption in standby mode : 0.2 W

Weight 17 Kg

PM 5005

This new addition to the Marantz collection is an excellent entry-level integrated amplifier that breaks all the rules. That's because it's the first in its class to offer Current Feedback architecture, a feature usually reserved for more expensive models. This technology offers very fast and accurate signal handling, enabling perfectly balanced stereo reproduction as well as a very precise and spacious soundstage. It's also recently been upgraded with discrete audio circuitry to optimize performance with a refined selection of components. Furthermore, this year's model looks more elegant than last year's model, thanks to the sleek new knob design. Additionally, we're offering a new remote control and new models.daliautomatic standby and low-power standby. But, getting back to the essence of the amplifier, the PM5005 offers 40W per channel into 8 ohms or 55W into 4 ohms and includes a chassis and front panel made of metal to ensure a very rigid and solid base. In addition, it also features a MM phono equalizer and Source Direct functionality to ensure shorter signal paths. Without a doubt, the PM5005 has raised the performance bar in the so-called entry-level range. Great sound. Incredible versatility.

PM 6006

The PM6006 is a further upgrade of the award-winning PM6005. Naturally, we used only discrete components in the preamp and power sections – not a single integrated circuit was used in the signal path.
PM6006 has been improved as the peak current value of the amplifier stage, to allow you to refine the sound in much more detail. You can connect a wide range of digital sources directly to this extraordinary integrated amplifier, to use its high-performance CS4398 24bit / 192kHz, high-current DAC, for incredible high-level audio performance with new media.
Additionally, the amplifier now features two optical inputs and one coaxial digital input (an additional optical input compared to the previous model, the PM6005). The entire digital section is fully protected by an additional metal casing to ensure that the digital stage does not influence the analog signal. Naturally, all the original features are still present, such as five line level audio inputs and one phono input, two pairs of gold-plated speaker terminals with bi-wiring capability, and a remote control.
The low-impedance shielded toroidal transformer, custom components and exclusive Marantz HDAM modules ensure the powerful, dynamic and detailed original Marantz sound.

PM8006

Marantz has launched the PM8006 stereo amplifier, the successor to the previous PM8005. The product comes with the now classic Marantz design. Inside we find an amplification section capable of delivering 70W into 8 Ohms, while power is supplied by a double-shielded toroidal transformer. The interior of the chassis also houses HDAM-SA3 (Hyper-Dynamic Amplifier Modules) modules. Current Feedback technology is also used.

One of the peculiarities of the PM8006 consists in the presence of a new phono stage called Marantz Musical Phono EQ stage. The changes introduced include a simplified signal path and two-stage amplification, capable of minimizing distortion. The re-equalization process is divided into a passive and an active section. Finally, Marantz has also optimized the electronic volume control.

Available connections include a MM (Moving Magnet) phono input, five inputs with an analog output on RCA, a power amp direct input, a pre out and connectors for connecting two pairs of speakers.

2 x 70 Watt (8 Ohm RMS) / 100 Watt (4 Ohm RMS), Current Feedback -+Amplification Circuitry, Discrete Input Buffer Circuitry, Dual Toroidal Power Transformer
shielding, Triple layer back plate, Sound characteristics completely re-optimized thanks to the use of new components, Fast shottky diodes for the power circuits,
Electric volume control for best channel separation and gain symmetry, New type of support feet to suppress vibrations, Phono MM equalization stage by
new design, Marantz proprietary HDAM-SA3 circuitry for a detailed
audio reproduction, High-quality customized components, Gold-plated input and output terminals, including Phono input (MM), New type of terminals for high-quality loudspeakers
quality

PM KI RUBY

Marantz has been designing and manufacturing amplifiers for over 65 years, and for 40 of those years, the products have reflected Ken Ishiwata's expertise. Now, to celebrate his four decades with the company, the PM-KI Ruby amplifier was developed and tuned by a highly experienced team of engineers, led by Ken Ishiwata himself. It features a fully discrete two-stage design with separate power supplies for the preamplifier and power amplifier, as well as a moving coil/moving magnet phono stage complete with Marantz Musical Premium Phono EQ circuitry, with Marantz HDAM technology for signal purity and exceptional audio quality. The PM-KI Ruby is built on a vibration-resistant double-layer chassis with thick aluminum panels for rigidity, and is laser-engraved with Ken Ishiwata's signature to celebrate his legacy.
Click to learn more about the history of MARANTZ RUBY

Marantz is a historic brand specializing in CD players, integrated amplifiers, and digital converters that combine ease of use with balanced sound quality. Its products are aimed at those seeking a compact and reliable stereo system without sacrificing excellent listening quality: from entry-level models like the CD60 and PM6007 to the more sophisticated Model 40N and SACD 30N, every Marantz solution is designed for those who want pure music without complications.

To choose the right model, first consider the primary source (CD, streaming, vinyl): Marantz SACD players offer superior resolution, while integrated amplifiers vary in power and connectivity. Then consider the available space and the pairing with your speakers: Audiocostruzioni It carries the entire Marantz range along with over 70 other brands, and you can listen to the different combinations in its Carpi listening room. Available new, guaranteed used, and ex-demo models, with a free consultation to find the solution that best suits your budget and needs.